Lignocon
The Lignocon is a specifically developed regulator. By its help we can regulate the hysteresis temperature developed for the drying of the wood, the relative moisture/humidity of the air as well as the humidity of the wood. After fixing the controlling parameters the system can automatically accomplish the drying of the wood (without any human help), but of course it requires some surveillance.
For the whole drying process we can offer 30 fix programs and there are another 69 programs that you can program according to your personal demands. The automatic system measures on 8 channels the humidity of the wood to be dried, on 2 other channels the temperature and the relative humidity of the drying room and on the basis of these parameters it determines the equilibred moisture of the wood (EMC) and the drying factor.
The whole drying process has 8 phases:
- Heating up
- Warming up
- 4 drying phases, following-up the lose of the moisture of the wood
- Equalization
- Cooling down
You can easily program the values of the drying phases.
The automatic system controls the ventilators of the heating room by the change of the direction of turning. The controlling system regulates the heating of the heating room on two outputs (full heating, reserve heating) for decreasing the energy consumption, in case of the overheating of the heating-room it regulates the temperature by ventilation. This system adjusts the moisture on the outputs of the humidification???? and the abstraction of steam (ventilation or condensation). The system regulates the climate of the heating-room by taking all the parameters into consideration. The 4 drying phases assures that the drying of the wood is accomplished in the most careful way, but in the shortest possible time.
This device has 4 operational modes:
- Test mode (test of controlling outputs)
- Full automatic mode (drying without any human help)
We deliver our equipment in a psychrometric basic type with RH sensor according to the measure of the relative moisture of the wood.
Features:
- 99 drying programs (30 recommended programs)
- programmable parameters
- optional computerized journaling/logging/recording of data
- 10-transistor controlling output
- error indication in case of errors in the operation or in the climate of the heating-room
- frekvency translation outputs
- 2 operational modes
- RH sensor or psychrometric execution
- detection of the opening of the heating-room?s door
- drying in heating-room with fresh air
- drying of condensation
- correction of 4 sorts of wood
- automatic correction of the temperature of the moisture of the wood
- display of all the measured and regulated parameters
- foil keypad
- display with 6-digit LED
- IP54 execution
- size: 125x213x50 mm
- advantageous price